SAB GOBLIN RAW 500, Руководство пользователя

Страница: 34 / 44

Solder the two
bullet connectors
Female
Connector Case 01
[H1818-01]
(H1818-S)
Female
Connector Case 02
[H1818-02]
(H1818-S)
OPEN
CLOSE
Box 2, Bag for page 33
Battery Tray
(H1758-S)
Double
Sided Tape
(HA035-S)
Battery Strap
(HA023-S)
Battery
Before permanently mounting the battery on the battery tray, check the ideal
position for the best center of gravity.
BATTERY ASSEMBLY
Use the included double sided tape to secure the battery to the tray.
Use the Velcro Strap [HA023-S].
Battery
Assembly
Socket Screw M2.5x6
(HC018-S)
Female
Connector
[H1820]
(H1818-S)
* Lubricate the ESC and battery connectors with WD40. (If needed)
* The locking lever has 2 positions, Open and Closed.
* The battery must be inserted with the lever in the closed position until a "click" is heard.
* To remove the battery, rotate the lever 180 degrees to the open position and pull the tray
out. We highly recommend to immediately turn the lever back to the closed position to
avoid forgetting to lock the battery on the next flight.
* Always check that the battery is securely locked before each flight. You can check this by
pulling on the battery, it should not come off if the lever is in the correct position and the
battery tray is locked.
Socket Head Cap
Screw M2.5x12
(HC026-S)
CAUTION:
Please be extremely careful when soldering and installing the female connectors to the
battery and installing them on the connector case. Lack of diligence and carefulness during
this step could cause the connectors to make contact causing severe injury or death.
Page 33
INSTALLATION OF THE BATTERIES