R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 56 (98)
Parameter Description
If the entered position has been established with an accuracy of at least ±10 meters,
activate this check box in order to enable transmission of the base station report with the
high accuracy position flag set.
Use Self-Surveyed Position
Alternative to entering the coordinates above manually, the position as presently self-
surveyed by R60 can be used by clicking this button. More details are found in section
6.6.3.
GNSS
Systems
Selects which GNSS systems should be used by R60 internal GNSS receiver.
Available systems are: GPS, Galileo, GLONASS and BeiDou.
Note, a maximum of 3 GNSS systems can be used concurrently, but due to restrictions in
the GNSS hardware all combinations are not available. If GLONASS and BeiDou are both
enabled, no more systems can be selected, otherwise all combinations of maximally 3
systems are allowed.
DGNSS
Source
Selects the source for differential GNSS corrections.
None: disables use of corrections.
Serial Input: receives corrections on RS-232 or RS-422 serial port in RTCM format.
AIS Msg 17 (Monitor only): selects that received AIS message 17 corrections should
be output on the RS-232 port in RTCM format. This alternative disables transmission
of AIS message 17.
Table 6-4 – Parameters on the GNSS page
