207
Car care
Front turn signal bulb
To change the bulb, the complete lamp unit has to be removed.
1 Loosen the screw (1). There is no need to remove it completely.
2 Carefully remove the complete lamp unit.
3 Grasp the two plastic tabs and turn the bulb holder counterclock-
wise.
4 Pull the bulb holder out of the lamp unit and change the bulb.
5 Check that the new bulb is firmly in place and has good contact.
6 When mounting the lamp unit, see that the two guide lugs on the
rear edge of the unit come inside the edge of the body panel.
7 Insert the lamp unit in towards the headlight and see that the
front bracket comes under the screw. Tighten the screw (1).
Side-mounted turn signal
1 Slide the lens forward so that its rear part can be pulled out.
2 Change the bulb.
3 When refitting, make sure that the groove in the spring engages
the edge of the body panel and that the rubber gasket is correctly
positioned.
IB904
1 Retaining screw
2 Turn signal bulb
IB906
Содержание 2001 9-3
Страница 10: ...10 This page has been left blank...
Страница 11: ...11 Safety Safety belts 12 Head restraint 18 Child safety 19 Airbag Supplemental RestraintSystem SRS 28 IB1301...
Страница 35: ...35 Security Security Doors 36 Central locking 36 Car alarm 41 IB1534...
Страница 116: ...116 Saab 9 3 Audio System This page has been left blank...