Overloading
Overloading
Overloading
Overloading
Make sure that sockets, extension flexes
and plug boxes are not overloaded as this
may lead to fire or electric shock.
Read the manual
Read the manual
Read the manual
Read the manual
On unpacking the device, please read the
manual carefully and observe all instructions
given.
Power Supply
Power Supply
Power Supply
Power Supply
Only the power supply indicated on the
rating plate must be used for this device. If
you are not sure which power supply you
have, please contact the distributor or the
local electricity supplier.
Earthing or polarization
Earthing or polarization
Earthing or polarization
Earthing or polarization
If the plug cannot be inserted properly into
the socket, or if the plug does not fit, the
device must not be used in your country.
Ventilation
Ventilation
Ventilation
Ventilation
The housing is provided with slots and
openings to ensure ventilation and reliable
operation and protect the device against
overheating. Do not block or cover these
openings. The openings must never be
blocked, for example by placing the device
on a bed, a sofa, a carpet or similar surface.
Heat
Heat
Heat
Heat
Do not place the device near sources of
heating such as radiator, register, stove or
other heat-producing devices (including
amplifiers).
Important safety
notices
Damage
Damage
Damage
Damage
Unplug the device and contact skilled
technicians in the following cases:
A) If power cord or plug is damaged.
B) If liquid has been spilled on the device or
objects have fallen into the device.
C) If the device has been exposed to rain or
water.
D) If the device does not work properly after
adhering to the instructions in the user
manual. Make only the setups mentioned in
the manual, as incorrect setup may cause
damage and will often make it difficult for a
skilled technician to make the device work
properly again.
E) If the device has been dropped or
damaged in any other way.
F) When the operation of the device
changes drastically, the device requires
service.
Service
Service
Service
Service
Do not attempt to carry out any service work
yourself. By opening or removing the
housing, you will be exposed to dangerous
voltage, etc. Any service work should be
carried out by skilled technicians.
Spare parts
Spare parts
Spare parts
Spare parts
If spare parts are required, make sure that
the technician uses spare parts specified by
the manufacturer or with the same
characteristics as the original component.
Unauthorised spare parts may cause fire,
electric shock, etc.
Содержание Geyser
Страница 1: ...english instruction manual...
Страница 6: ...Front and rear panel...
Страница 7: ...Remote control...