SA Geyser, Инструкция по эксплуатации

Страница: 12 / 13

Troubleshooting
Please check the schematic below before requesting service.
Common symptom Common symptom Common symptom Common symptom Possible cause Possible cause Possible cause Possible cause Remedy Remedy Remedy Remedy
No function Mains power is not connected Connect to mains power outlet
Power is OFF Turn the power ON.
No playback No disc is inserted Insert a disc.
Disc is upside down Reload disc.
The label side should
face upward.
Dirty disc surface. Clean disc surface.
Deformed/scratched disc Replace disc.
Condensation in unit Turn power on for 1-2
hours
before using the unit.
Sound in one or more Poor or missing cable connection Check connections
channel(s) is missing
The remote doesnt work The batteries are weak or dead Change the batteries
The batteries are not installed properly Install the batteries
according to the
marks in the battery
compartment
The remote is not aimed at the sensor Aim the remote at the
sensor
Something is blocking the path Clear the path
between the remote
and the sensor.
USB no playback The file(s) in the device is not supported WMA supported only.
or bad sound. The file(s) in the device is not proper. Restore files to the
devices.
Unstable connection. Check the connector.