JFK Product & Installation Instructions #8920100 Feb 2, 2015
Pg. 8
Section II
SET-UP, ASSEMBLY AND ADJUSTMENTS
Pre-Assembly Instruction for Collapsible JFK Uprights (355-05)
Note: This step must be done first, before any further Assembly of your Apparatus!
Ensure the screws are tightened securely!
1.
Locate the two Upright Ends (355-312), a Base Tube and
the 7/32” Allen key.
2.
Slide the Base Tube over the connection block with the hole
facing upwards as shown. Line up the holes and thread the
supplied 3/8” Flat Head Screw into the hole. Tighten screw
firmly with a 7/32” Allen key. (Fig. 1)
3.
Repeat previous step to assemble the other upright to the
base tube. The resulting assembly is now referred to as a
JFK Upright Assembly Part #355-05. (Fig. 2)
4.
Ensure the assembly is stable before proceeding.
Note: Refer to the Main JFK Assembly literature for complete
details on Base fastening and assembly of all other
related components for the particular Just For Kids
Apparatus.
Fig. 1
Fig. 2 – Uprights and Base Tube Assembled
3/8” FLAT
HEAD SCREW
BASE TUBE
UPRIGHT END
CONNECTION BLOCK
