10
G
THERMASREG
®
RTR -E - UP
Rev. 2017 - V11 GB
Electronic single-room controllers ⁄ "clock thermostats with week program
THERMASREG
®
RTR-E-UP
with internal sensor or 4-meter remote
sensor for in-wall installation suitable for temperature monitoring and control, for activating any kind of heating system and valves (closed when
currentless), as room temperature controller, room thermostat, floor temperature controller, or clock controller, e. g. for electric floor direct
heating systems, for bathrooms, for night storage, wall, ceiling and gas heating systems.
TECHNICAL DATA
Power supply:
230 V AC, 50 Hz
Temperature sensor:
NTC according to DIN 44574, sensor extension up to max. 50 m,
with double insulation according to EN 60730-2-1
Control range:
see table
+15...+30 °C for room temperature controllers
+10...+60 °C for floor temperature controllers
+15...+30 °C and
+20...+60 °C for combined controllers
Output:
1x normally open contact (single ended)
Switching capacity:
3.6 kW
Switching current:
16 A (ohmic load)
(Contact load)
Safety:
with sensor breakage and sensor short circuit protection
(in case of sensor breakage or sensor short circuit heating is switched of)
Operating difference:
approx. 0.6 K
Enclosure:
plastic, colour pure white (similar RAL 9010)
Dimensions:
80 x 80 x16 mm
Electrical connection:
0.14 - 2.5 mm
2
via terminal screws on circuit board
Temperature range limitation:
in the turning knob
Installation:
in in-wall flush box Ø = 55 mm
Protection class:
II (according to EN 60 730)
Protection type:
IP 30 (according to EN 60 529)
Standards:
CE conformity,
electromagnetic compatibility according to EN 61 326,
EMC directive 2014 ⁄ 30 ⁄ EU,
low-voltage directive 2014 ⁄ 35 ⁄ EU
