In DRY Operation
1. The DRY mode should be used to reduce the humidity of the room
2. In DRY operation, the fan speed cannot be changed. There will be a 3 minute delay until fans start.
3. The fans in the outdoor and indoor unites are controlled by the microprocessor and the fans will
operate occasionally in DRY operation.
4. The room temperature is slightly lowered in the DRY mode.This mode cannot be used when the
current room temperature is 13 Or lower.
5. In order to reduce stress on the compressor, the unit cannot be operated for 3 minutes after either a
power failure or the DRY operation is stopped.
Air Flow Velocity and Direction Adjustment
1. Press the FAN button to adjust the velocity of the air flow. Each time the button is pressed the fan speed is
changed as follows. AUTO
LOW MEDIUM HIGH
2. To adjust the direction of the air flow press the HORIZONTAL VANE CONTROL button . Each time the
button is pressed the horizontal vanes will change position from
.
3. When COOL or DRY mode has been selected the most effective Position of the horizontal vanes is wither
or
and when HEAT mode is selec ted the most effective positions are and
.
4. Once the desired room temperature has been reached the swing mode
should be selected.
PLEASE NOTE:To change the horizontal air flow direction adjust the vertical vanes manually before operation
starts as the horizontal vanes can move automatically and your fingers may get caught.
To Set Timer on Function
1. The unit must be off when you begin setting the TIMER on function.
2. Press the TIMER ON button and the
will flash on the screen.
3. When the icon flashes the start timer can be set. Press the HOUR and Minute buttons to adjust the
required time.
4. Once the start time has been set, press the Set Temp button to send the Timer On setting to the unit.
5. To cancel the operation press the Timer ON button again.
To Set the Timer Off Function
1. The unit must be on when you begin setting the TIMER OFF function.
2. Press the TIMER OFF button and the will flash on the screen.
3. When the icon flashes the finish time can be set by pressing the Hour and Minute Buttons to adjust
the time required.
4. Once the finish time has been set press the Set Temp button to send the Timer Off setting to the unit.
5. To Cancel the operation press the Set Temp Button to send the TIMER OFF Setting to the unit.
6. To cancel the operation press the TIMER OFF Button again.
Set the Comfortable Sleep Mode Function
1. Ensure the machine is on
2. Press the Sleep Button to start the sleep mode function.
Sleep Function
1. The indoor fan motor changes to a low speed
2. In cool operation mode each hour the temperature will raise by 1
(max 2 )
3. In heat operation mode each hour the temperature will raise by 1 (max 2 )
4. In dry operation the temperature will not change.
To Cancel the Sleep Function
You can cancel the sleep function mode by selecting one of the below methods:
1. Press the Sleep Button
again
2. Press the ON/OFF Button
3. Press the Mode Button
4. Press the Fan Button to change the fan speed.
e Button F
unction
1. Press the e Button once the unit goes into AUTO function mode which will adjust the fan speed
swing function and mode settings automatically.
2.
To cancel this function press the Mode Button.
8 |
Page
9 |
Page
Содержание TKF-26GW/BP
Страница 3: ......
