GB
16
PTO Instant adaptor
This allows attachments to be coupled and de-
coupled quickly and easily to and from the PTO.
The lever (1) has two positions (see fig. 11):
−
Locked position: pull up lever (1).
−
Released position: push down lever (1).
A decal (see detail A) near the PTO instant adaptor
lever illustrates operation. See page 18 for instruc-
tions on how to fit the attachments.
CONTROLS OF FRONT-MOUNTED
ATTACHMENTS
When the machine is used with front-mounted at-
tachments, the gear and the PTO levers are reversed
with respect to when the machine is used as a two-
wheel tract. This is due to reversal of the direction of
motion. Lever (fig. 12, item 1) becomes the gear lever,
and lever (2) becomes the PTO control lever.
The symbols shown in figure 12 and applied to the
column, remind the user about the functions of the
levers.
OPERATING THE
TWO-WHEEL TRACTOR
WARNING
Before operating your two-wheel tractor, read care-
fully and commit to memory the instructions given in
the “SAFETY REGULATIONS” paragraph at the be-
ginning of this manual.
STARTING THE ENGINE
NOTE
See the engine Operation and Maintenance Manual
for all informations regarding the engine.
CAUTION
Oil bath air filter (if fitted)
- When delivered new,
there is no oil in the air filter.
Before using your two-wheel tractor, add motor oil up
to the marked level.
a.
Disengage all control levers before starting the
engine.
b.
Gasoline engines:
in order to gain access to the
refuelling cap, it is necessary to open the hood.
Unlock the turnbuckle (fig. 13, item 1), open the
hood (2), and rotate the lever (3) upward.
c.
Gasoline engines:
open the fuel cock.
d.
Gasoline engines:
if cold starting the engine, use
the choke.
e.
Press down the engine stop lever (fig. 14, item 1).
f.
Pull clutch lever (2) fully up.
Содержание REV. 1000 Diesel (2+2)
Страница 2: ......
Страница 26: ...GB 24 Every 300 hours Change the tiller drive unit oil as instructed above...