s::can con::cube D-330, Руководство пользователя

Страница: 14 / 42

Plan of terminal connections for con::cube D-330-230
Plan of terminal connections for con::cube D-330-024
5.2 Connection of s::can Spectrometer Probe
An s::can spectrometer probe can be connected to the external connector for spectrometer probes, which is marked with no.4
in the figure of section 3.3. If an extension cable is used the total length of the probe‘s cable should not be more than 40 m.
If necessary, a con::nect box (B-23-xxx) has to be used to connect a further spectrometer probe.
5.3 Connection of s::can ISE Probes and Sensors
Alternative or additional to the spectrometer probe it is possible to connect ISE probes, i::scan and / or s::can sensors via
the sys plug connectors located on the con::cube. These connectors are marked with no.5 in the figure of section 3.3. If an
extension cable is used the total length of the probe’s cable should not be more than 40 m.
If necessary, the distribution box (B-41-HUB) has to be used to increase the number of plugs.
con::cube D-330, 01-2020 Release Copyright © s::can Messtechnik GmbH
www.s-can.at 14 / 42