Ryobi TSS702, Руководство оператора

Страница: 11 / 104

11 − English
FEATURES
LED LIGHTING SYSTEM
The LED casts a shadow of the blade teeth onto the workpiece for
making precision cuts and predicts blade kerf for blade cut line.
MITER FENCE
The miter fence on the compound miter saw has been provided
to hold your workpiece securely against when making all cuts.
The right side is larger, providing additional support.
MITER LOCK HANDLE
See Figure 3.
The miter lock handle securely locks the saw at desired miter
angles. Tighten the handle to lock the saw in place. To release
the saw, loosen the handle and squeeze the detent release lever.
MITER SCALE
The miter scale can be set from 0° to 47° (both left and right)
to achieve a wide variety of cuts.
PARTIAL SLIDING FENCE
The partial sliding fence on your compound miter saw has
been provided to help secure the workpiece when making
straight cuts.
The sliding feature makes it easy to adjust the position of the
partial fence. Loosen the fence screw before attempting to
slide the partial fence. Once the desired position is determined,
tighten the fence screw to secure.
POSITIVE STOPS ON MITER TABLE
Positive stops have been provided at 0°, 15°, 22.5°, 31.6°, and
45° on both the left and right side of the miter table.
NOTE: To bypass the positive stops, squeeze the detent release
lever and lift the detent override. To release the override, squeeze
the detent release lever.
SELF-RETRACTING LOWER BLADE GUARD
The lower blade guard is made of shock-resistant, see-through
plastic that provides protection from each side of the blade. It
retracts over the upper blade guard as the saw is lowered into
the workpiece.
SLIDE BARS
When unlocked, the saw arm will glide forward and backward
the length of the slide bars for cutting various workpiece widths.
SLIDE LOCK KNOB
The slide lock knob locks and unlocks the sliding feature of
this tool.
SPINDLE LOCK BUTTON
See Figure 4.
The spindle lock button locks the spindle and stops the blade
from rotating. Depress and hold the lock button while installing,
changing, or removing blade.
Fig. 4
PADLOCK
SWITCH
TRIGGER
SWITCH
TRIGGER
SWITCH TRIGGER
See Figure 4.
The saw will not start until you depress the trigger lockout
lever and squeeze the switch trigger. To prevent unauthorized
use of the compound miter saw, disconnect it from the power
supply and lock the switch in the off position. To lock the switch,
install a padlock (not included) through the hole in the switch
trigger and make certain the switch is inoperable. If the switch
is still operable with the padlock installed, a padlock with a
larger shackle diameter must be used. Store the padlock key
in another location.
PADLOCK
HOLE
TRIGGER
LOCKOUT LEVER
SPINDLE
LOCK BUTTON