background image

Page 7

KNOW YOUR CORDLESS CIRCULAR SAW

See Figure 1.

Before attempting to use any tool, familiarize yourself with
all operating features and safety requirements.

Features include easily operated bevel cut and depth of cut
adjustment mechanisms; positive 0

°

 bevel stop; spindle

lock; and blade wrench storage.

APPLICATIONS

(Use only for the purpose listed below)

Cutting all types of wood products (lumber,
plywood, paneling).

FEATURES

SWITCH

Your saw is equipped with a lock-off button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You must
depress the lock-off button in order to pull the switch trigger.
The lock resets each time the trigger is released.

NOTE: You can depress the lock-off button from either the
left or right side.

Fig. 1

SWITCH

TRIGGER

UPPER

BLADE GUARD

LOWER

BLADE GUARD

BLADE

BASE

ASSEMBLY

BEVEL CUT

ADJUSTMENT

(BEVEL ADJUSTMENT KNOB)

BLADE WRENCH

(5 mm HEX KEY)

DEPTH OF

CUT ADJUSTMENT

(DEPTH ADJUSTMENT KNOB)

BLADE WRENCH

STORAGE AREA

OPTIONAL RIP

GUIDE SCREW

(WING SCREW)

OPTIONAL RIP
GUIDE SCREW

(WING SCREW)

LOCK-OFF

BUTTON

45

45 50

50

30

30

22

22

SPINDLE

LOCK BUTTON

WARNING:

Always wear safety goggles or safety glasses with side
shields when operating tools. Failure to do so could result
in objects being thrown into your eyes, resulting in possible
serious injury.

WARNING:

Do not allow familiarity with your circular saw to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict severe injury.

Содержание RY6200





















Отзывы: