Operation: Opening The Workbench
The Portable Clamping Workstation is packaged completely folded. To open:
1. Place the workbench flat on the floor.
2. Grasp the openings on both sides of the table top and pull out on the release latches as shown in
figure A.
CAUTION:
Do not pull the legs out when the workbench is in a closed position. Beware of fingers
when opening, sliding parts may pinch
3. With the release latches pulled in, lift the table top. The four legs will drop down and lock into place
and the side supports will lift up. (figure B)
4. To lock the side supports, push out from the inside until the support locks into position (figure C).
CAUTION:
Risk of Unsafe Operation. Make sure all four legs and both side supports are locked in
place.
5. After locking the side supports in place, lift the center support section by the carrying handle until
you hear it “click” into place as shown in figure D.
6. When the center support section is properly locked in position, the LOCK button shown in figure E
will be visible.
CAUTION:
Risk of Unsafe Operation. Make sure the center support section is locked in place.
®
A
B
D
E
C
Содержание RWT2CL
Страница 1: ...22 08 2016 Version 1 0 RWT2CL 579963 ...
