Ryobi RSDS1500, Оригинальное руководство пользователя

Страница: 4 / 20

2
This will ensure that the safety of the power tool is
maintained.
HAMMER SAFETY WARNINGS
Ŷ
Wear ear protectors. Exposure to noise can cause
hearing loss.
Ŷ
Use auxiliary handle(s), if supplied with the tool.
/RVVRIFRQWUROFDQFDXVHSHUVRQDOLQMXU\
Ŷ
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord . Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Ŷ
Wear safety goggles to protect your eyes from flying
particles and splinters.
Ŷ
When working in walls ceiling, or floor, take care to
avoid electric cables and gas or water pipes.
ADDITIONAL SAFETY WARNINGS
Ŷ
We recommend that the product always be supplied via
a residual current device (RCD) with a rated residual
current of 30 mA or less.
Ŷ
Switch the product off immediately if the insertion tool
stalls. Do not switch the product on again while the
insertion tool is stalled, as doing so could trigger a
sudden recoil with a high reactive force. Determine why
the insertion tool stalled and rectify this, paying heed to
the safety instructions.
Ŷ
The following are the possible causes of insertion tool
stall:
Ɣ
The insertion tool is tilted in the workpiece
Ɣ
The insertion tool has pierced through the workpiece
Ɣ
The power tool is overloaded
Ŷ
Clamp the workpiece with a clamping device.
8QFODPSHG ZRUNSLHFHV FDQ FDXVH VHYHUH LQMXU\ DQG
damage.
Ŷ
Do not reach into the product while it is running.
Ŷ
Sawdust and splinters must not be removed while the
product is running.
Ŷ
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
SULQFLSDOV $ FDUHOHVV DFWLRQ FDQ FDXVH VHYHUH LQMXU\
within a fraction of a second.
Ŷ
Make sure the cord is located so that it will not be
stepped on, tripped over, come in contact with sharp
HGJHV RU PRYLQJ SDUWV RU RWKHUZLVH VXEMHFWHG WR
damage or stress. This will reduce the risk of accidental
IDOOVZKLFKFRXOGFDXVHLQMXU\DQGGDPDJHWRWKHFRUG
which could result in electric shock.
Ŷ
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of
the tool in unexpected situations.
Ŷ
The insertion tool may become hot during use. Danger
of burns:
Ɣ :KHQFKDQJLQJWRROVELWV
Ɣ
When setting the device down
RESIDUAL RISKS
Even when the rotary hammer drill is used as prescribed,
it is still impossible to completely eliminate certain residual
risk factors. The following hazards may arise and the
operator should pay special attention to avoid the following:
Ŷ
Risk of electrocution if electric cables are drilled into.
Always grasp the tool by designated handles, do not
touch the drill bits.
Ŷ .LFNEDFNZKLOVWGULOOLQJLIWKHELWMDPV$OZD\VXVHWKH
side handle and grip the tool firmly.
Ŷ
Damage to the respiratory system. Wear respiratory
protection masks containing filters appropriate to the
materials being worked. Ensure adequate workplace
ventilation. Do not eat, drink or smoke in the work area.
Ŷ
Damage to hearing. Always wear effective hearing
protection and limit exposure to noise.
Ŷ
Damage to eyes from flying dust and debris particles.
Always wear suitable eye protection.
Ŷ ,QMXU\FDXVHGE\YLROGWKHWRROE\GHVLJQDWHG
handles and limit exposure to vibration. See “RISK
REDUCTION”.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
QXPEQHVV DQG EODQFKLQJ RI WKH ¿QJHUV XVXDOO\ DSSDUHQW
XSRQ H[SRVXUH WR FROG +HUHGLWDU\ IDFWRUV H[SRVXUH WR
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
Ŷ
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
ZDUP,WLVUHSRUWHGWKDWFROGZHDWKHULVDPDMRUIDFWRU
contributing to Raynaud’s Syndrome.
Ŷ
After each period of operation, exercise to increase
blood circulation.
Ŷ
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
,QMXULHV PD\ EH FDXVHG RU DJJUDYDWHG E\ SURORQJHG
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
MAINTENANCE
WARNING
The product should never be connected to a power supply
ZKHQ \RX DUH DVVHPEOLQJ SDUWV PDNLQJ DGMXVWPHQWV
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product will prevent
DFFLGHQWDOVWDUWLQJWKDWFRXOGFDXVHVHULRXVLQMXU\
WARNING
When servicing use only original manufacturer’s
replacement parts. Use of any other parts may create a
hazard or cause product damage.
Ŷ
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.