1
2
1
2
2
1
3
4
5.5-7 mm
ADJUSTING THE CHAIN TENSION
1. Remove the battery pack.
2. Loosen the bar mounting nuts.
3. Use a screwdriver to turn the chain
tensioning screw and adjust the chain
tension. Adjust the chain tension until the
gap between the drive teeth and the bar
is between 5.5 and 7 mm. To increase
the chain tension, turn the screw
clockwise. To reduce the chain tension,
turn the screw counterclockwise.
NOTE:
Frequently check the chain
tension while turning the screw.
4. Tighten the bar mounting nuts.
18
OPERATION
Содержание RCS36HP
Страница 1: ...RCS36HP ORIGINAL INSTRUCTIONS Cordless Chainsaw...
Страница 10: ...x 1 x 1 x 1 RCS36HP 10 WHAT S IN THE BOX...
Страница 14: ...14...
