Ryobi RCS1400, Оригинальное руководство пользователя, Страница: 5 / 176

3
English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
■
For RCS1400 only: A power spike causes voltage
fluctuations and may affect other electrical products in
the same power line. Connect the product to a power
supply with an impedance equal to Zmax=0.459
Ω
to
minimize voltage fluctuations.
LASER SAFETY (RCS1600)
■
The laser radiation used in this saw is Class 2 with
maximum
≤
1mW and 650nm wavelengths. Do not stare
into the laser beam. Failure to comply with the rules
could result in serious personal injury.
■
We have supplied you with an adhesive label in your
language and now request that you please apply this
over the top of the existing English language label
that is located on the side of the tool prior to first
commissioning the machine.
■
Do not stare into beam during operation.
■
Do not project the laser beam directly into the eyes of
others. Serious eye injury could result.
■
Do not place the laser in a position that may cause
anyone to stare into the laser beam intentionally or
unintentionally.
■
Do not use optical tools to view the laser beam.
■
Do not operate the laser around children or allow
children to operate the laser.
■
Do not attempt to repair the laser device by yourself.
■
Do not attempt to change any parts of the laser device
by yourself.
■
Any repairs must only be carried out by the laser
manufacturer or authorized service agent.
■
Do not replace the laser with a different type.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
■
Injury caused by kickback
– Read and understand the information in this
manual.
■
Injury caused by dust
– Dust may enter the eyes or respiratory system.
Wear eye protection at all times. Wear appropriate
dust control mask with filters suitable for protecting
against particles from the material being cut. Do
not eat, drink, or smoke in the work area. Ensure
adequate ventilation.
■
Injury caused by electric shock
– The blade may contact hidden wiring, causing
parts of the product to become live. Always hold
the product by the designated handles and take
care when blind-cutting into walls and floors where
cables may be hidden
NOTE:
When working on walls, ceilings, or floors, take
care to avoid electric cables and gas or water pipes.
■
Injury caused by contact with the blade
– The blades are very sharp and will become hot
during use. Wear gloves when changing blades.
Keep hands away from the cutting area at all times.
Never hold workpiece being cut in your hands or
across your leg. Clamp the workpiece whenever
possible.
■
Injury caused by vibration
– Limit exposure. See Risk Reduction.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the
fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 135.
1. Trigger
2. Lock-off button
3. Upper guard
4. Dust port adapter
5. Lower guard lever
6. Blade bolt
7. Lower guard
8. Handle, insulated gripping surface
9. Angle scale
10. Angle scale lock knob
11. Rip guide lock
12. Base