Ryobi RC960, Руководство оператора

Страница: 4 / 12

Page 4
■
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
■
Follow Instructions – All operating and use instructions
should be followed.
■
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
■
Attachments – Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
■
Accessories – Do not place this product on an unstable
cart, stand, tripod, bracket, or table. This product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product should
follow the manufacturer's instructions, and should use a
mounting accessory recommended by the manufacturer.
■
Power Sources – This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your product dealer or local power
IMPORTANT SAFETY INSTRUCTIONS
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
■
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the product.
■
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
■
Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
■
Replacement Parts – When replacements parts are re-
quired, be sure the service technician has used replace-
ment parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
SYMBOLS
SAFETY AND INTERNATIONAL SYMBOLS
MEANING
Do not expose to rain or use in damp locations.
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information.