Ryobi RC-3100B, Руководство по эксплуатации для владельца

Страница: 7 / 20

7
UNPACKING
CAUTION. This packaging contains
sharp objects. Take care when
unpacking. Remove the machine,
together with the accessories supplied, from the
packaging. Check carefully to ensure that the
machine is in good condition and account for all the
accessories listed in this manual. Also make sure
that all the accessories are complete.
If any parts are found to be missing, the machine
and its accessories should be returned together in
their original packaging to the retailer. Do not throw
the packaging away, keep it safe throughout the
guarantee period, then recycle if possible,
otherwise dispose of it by the proper means. Do
not let children play with empty plastic bags due to
the risk of suffocation. Take care when lifting the
compressor from the packaging.
CAUTION. Do not lift the compressor by
the pressure regulator. To prevent injury,
get assitance when lifting or moving the
compressor. This unit weighs 59.2kg.
ASSEMBLY
PACKING CONTENTS
• Belt driven compressor
• Wheels x 2
• Wheel fixings (bolt, nut) x 2
• Rubber foot x 2
• Rubber foot fixings (bolt, nut) x 2
• Dipstick
• Operator’s Manual
WARNING. If any parts are damaged or
missing, do not operate this product until
the parts are replaced. Use of this
product with damaged or missing parts
could result in serious personal injury.
WARNING. Do not connect to power
supply until assembly is complete.
Failure to comply could result in
accidental starting and possible serious
personal injury.
WARNING. Do not attempt to modify this
product or create accessories not
recommended for use with this product.
Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
personal injury.
FITTING THE WHEELS
Fit the two transportation wheels to either side of
the compressor as shown in Fig.1 using a spanner
(not supplied).
FITTING THE RUBBER FOOT
To fit a rubber foot locate the bolt provided through
the hole in the rubber foot and hole on the
compressor support bracket (Fig.2). Tighten the nut
with a spanner or socket (not provided) to secure
the rubber foot into position.
Fig. 1
Bolt
Wheel
Nut
Fig. 2