![background image](http://html1.mh-extra.com/html/ryobi/ra-nc1565-k/ra-nc1565-k_operators-manual-original-instructions_1505915008.webp)
4
SPECIFICATIONS
FASTENER
Nail type
15° coil nails, wire
collated,
Dia. 2.3 - 2.9 mm
Nail range:
38 - 65 mm
Head diameter:
5.0 - 6.3 mm
Collation angle: 15°
Nail distance:
7 - 8 mm
15° coil nails, plastic
collated,
Dia. 2.3 - 2.9 mm
Nail range:
32 - 65 mm
Head diameter:
5.0 - 6.3 mm
Collation angle: 15°
Nail distance:
7 - 8 mm
TOOL
Magazine capacity
250 - 300 nails
Air inlet size
6.35 mm (1/4”)
Air hose size
9.52 mm (3/8”)
Air consumption
1.9 L/cycle at 6.9 bar (100 psi)
Working pressure
range
5.5 - 8.3 bar (80 - 120 psi)
Exhaust
Rear adjustable (360°)
Tool weight
(no nails)
3.03 kg
NOISE AND VIBRATION
Noise according to EN 12549:1999 and EN ISO 4871
A-weighted sound
pressure level
LPA=87.8 dB(A), KPA=2.5 dB
Sound power level
LWA=100.8 dB(A), KWA=2.5 dB
A-weighted sound
pressure level(at
working station)
LPA=91.0 dB(A), KPA=2.5 dB
C-weighted sound
pressure level
LPC,peak=91.8 dB(A),
KPC,peak=2.5 dB
Vibration according to ISO 8662-11:1999
Vibration in the
handle
ah,W=11.5 m/s2,
K=1.5 m/s2
INTENDED USE
The tool can be used for the purposes listed below:
Ŷ 3O\ZRRGDQG¿EUHFHPHQWVKHHWEUDFLQJ
Ŷ
Triple grips, multi-grips and steel bracketry
Ŷ 6WHHODQJOHDQGÀDWEUDFLQJ
Ŷ
Ceramic tile underlay
Ŷ
Vinyl and cork underlay
Ŷ
Exterior cladding
Ŷ
Blueboard sheeting for rendering
Ŷ
Timber decking
Ŷ
Timber fencing
Ŷ
Pallet and crate assembly
AIR SUPPLY AND OPERATION
Ŷ
Ensure air valve (or trigger) is in the “off” position
before connecting to the air supply.
Ŷ
Required air pressure range of 5.5 - 8.3 bar (80 - 120
psi), and an airflow according to specifications.
Ŷ
Disconnect the product from the compressed air supply
before changing accessories or making adjustments.
Ŷ
Connect the product to the air hose.
Ŷ
Push the tool against the work surface and squeeze
the trigger to drive a fastener.
Ŷ
Do not use any additional force upon the product.
WARNING
Ensure the air supply is clean and does not exceed
8.3 bar (120 psi) while operating the product. Too
high an air pressure and unclean air will shorten the
product's life due to excessive wear, and may be
dangerous causing damage and/or personal injury.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Ŷ
Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.