background image

Safety

1

Safety, performance, and dependability have been given 
top priority in the design of your rotary hammer.

INTENDED USE

This rotary hammer drill is intended to be used only by 
adults who have read and understood the instructions and 
warnings in this manual and can be considered responsible 
for their actions. It is to be used by a single operator by 
grasping both trigger and side handles.
The rotary hammer drill is designed to operate without 
hammer function into wood and metal. For chiselling and 
masonry drilling, the hammer mode may be used.
The rotary hammer drill is designed to operate with drill 
bits up to the maximum diameter defined in the product 
specification table. 
Do not use the product in any way other than those stated 
for intended use.

GENERAL POWER TOOL SAFETY WARNINGS

 

 WARNING

Read all safety warnings and all instructions.

 Failure 

to follow the warnings and instructions may result in 
electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

.

The term “power tool’’ in the warnings refers to your 
mains-operated (corded) power tool or battery-operated 
(cordless) power tool.

WORK AREA SAFETY

 

Ŷ

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

 

Ŷ

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

 

Ŷ

Keep children and bystanders away while operating 
a power tool.

 Distractions can cause you to lose 

control.

ELECTRICAL SAFETY

 

Ŷ

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools.

 

Unmodified plugs and matching outlets will reduce risk 
of electric shock.

 

Ŷ

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded.

 

Ŷ

Do not expose power tools to rain or wet conditions.

 

Water entering a power tool will increase the risk of 
electric shock.

 

Ŷ

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords increase 

the risk of electric shock.

 

Ŷ

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric 
shock.

 

Ŷ

If operating a power tool in a damp location is 
unavoidable, use a residual current device (RCD) 
protected supply.

 Use of an RCD reduces the risk of 

electric shock.

PERSONAL SAFETY

 

Ŷ

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do 
not use a power tool while you are tired or under the 
influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in 
serious personal injury.

 

Ŷ

Use personal protective equipment. Always wear 
eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat or hearing 
protection used for appropriate conditions will reduce 
personal injuries.

 

Ŷ

Prevent unintentional starting. Ensure the switch 
is in the off-position before connecting to power 
source and/or battery pack, picking up or carrying 
the tool.

 Carrying power tools with your finger on the 

switch or energising power tools that have the switch 
on invites accidents.

 

Ŷ

Remove any adjusting key or wrench before turning 
the power tool on.

 A wrench or a key left attached to 

a rotating part of the power tool may result in personal 
injury.

 

Ŷ

Do not overreach. Keep proper footing and balance 
at all times.

 This enables better control of the power 

tool in unexpected situations.

 

Ŷ

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair, clothing and gloves away 
from moving parts.

 Loose clothes, jewellery or long 

hair can be caught in moving parts.

 

Ŷ

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

POWER TOOL USE AND CARE

 

Ŷ

Do not force the power tool. Use the correct power 
tool for your application.

 The correct power tool will 

do the job better and safer at the rate for which it was 
designed.

 

Ŷ

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

 

Ŷ

Disconnect the plug from the power source and/or 

Содержание R18SDS

















Отзывы: