![background image](http://html.mh-extra.com/html/ryobi/pmc1217k/pmc1217k_operators-manual_1503682008.webp)
8 — English
To order these accessories, call 1-800-525-2579.
Brass Nozzle ........................................................................................................................................ Model No. PMC080
Nozzle Cleaner .................................................................................................................................. Model No. PMCC008
1/2 in. PVC Coupler with Nozzle ......................................................................................................... Model No. PMC160
1/2 in. PVC Hose Adaptor ................................................................................................................... Model No. PMC170
4 in. Flexible Nozzle Extension (5 pack) .......................................................................................Model No. PMC005PNE
1/2 in. Hanging Mount (5 pack) ..................................................................................................... Model No. PMC400HM
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Leak at nozzle, threaded hole, or
coupler
Nozzles were installed improperly.
Nozzles clogged or dirty.
A water-tight seal was not created
when assembling the coupler and PVC
misting tubes.
Reinstall nozzles and tighten securely.
Clean nozzles.
If possible, re-cement the leaking sec-
tion. If not possible, the leaking section
must be removed and replaced.
Misting kit will not spray
Water faucet is off.
T-filter is clogged.
Nozzles clogged or dirty.
Turn hose faucet completely on.
Follow instructions for cleaning strainer
in
Maintenance.
Clean nozzles.
Loss of pressure
T-filter is clogged.
Follow instructions for cleaning strainer
in
Maintenance.
Water stuck in misting tube assembly
after use
Defective drain valve.
Drain valve not connected to lowest
point in system.
Replace drain valve.
Move the drain valve to the lowest
position available.
ACCESSORIES
TROUBLESHOOTING
NOTE: ILLUSTRATIONS START ON PAGE 9 AFTER FRENCH
AND SPANISH LANGUAGE SECTIONS.
Содержание PMC1217K
Страница 23: ...NOTES NOTAS ...
Страница 24: ...NOTES NOTAS ...