Ryobi PCL631, Руководство оператора

Страница: 7 / 24

7 – English
MOUNTING/HANGING THE PANEL LIGHT
See Figures 6 - 8, page 9.
In addition to sitting upright on its base on a flat surface, the
panel light offers a variety of hanging and mounting options in
both the vertical and horizontal position to suit your specific
location and needs.
NOTE: Be careful not to position the panel light in such a
way that prevents normal operation or damages the cord.
WARNING:
Only hang or mount the panel light in an area where no
electrical wires, utility cables, pipes, or other obstruc-
tions are located. Contact your local utility company or a
qualified electrician if you are unsure. Do not hang panel
light from any electrical power cord. Ensure panel light is
securely installed to prevent falling object hazard. Failure
to follow these instructions can result in electrocution,
electrical shock, or other serious personal injury.
Hanging the panel light using the keyholes:

Install two screws approximately 6 in. apart.

Place the wide portion of the keyholes over the heads of
screws.

Slide the panel light down until the screws are inside
the narrow portion of the keyholes and the panel light is
secure.
Mounting the panel light to a tripod using the tripod
mounting hole:
The panel light can be mounted to any tripod that has a
1/4-20 thread mounting screw. Tripod requires minimum
distance of 35 in. between legs with 4 ft. mounting height.

Place the panel light on the tripod mounting screw. Make
sure the screw properly engages the mounting hole, on
the bottom of the light cannon.
 Secure the panel light to the mounting screw as described
in the tripod operator’s manual.
OPERATION
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
STORING THE PANEL LIGHT
Store indoors in a dry, locked up place out of the reach of
children, with the battery pack removed and power cord
disconnected. Keep away from corrosive agents such as
garden chemi cals and de-icing salts.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
MAINTENANCE
NOTE: ILLUSTRATIONS START ON PAGE 8
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.