background image

19

MAINTENANcE

BATTERY PAcK REMOVAL ANd PREPARATION 
FOR REcYcLING

To  preserve  natural  resources,  please 
recycle  or  dispose  of  batteries 
 properly.
This product uses nickel-cadmium and 
lithium-ion  batteries.  Local,  state  or 
federal  laws  may  prohibit  disposal  of 
batteries in ordinary trash.
Consult  your  local  waste  authority  for 
information regarding available recycling 
and/or disposal options. 

WARNING: 

Upon removal, cover the battery pack’s terminals with 
heavy-duty adhesive tape. Do not attempt to destroy or 
disassemble battery pack or remove any of its compo-
nents.  Lithium-ion  and  nickel-cadmium  batteries  must 
be recycled or disposed of properly. Also, never touch 
both terminals with metal objects and/or body parts as 
short circuit may result. Keep away from children. Failure 
to comply with these warnings could result in fire and/or 
serious injury.

Li - Ion

BATTERIES

This product will accept 18 V lithium-ion batteries or 18 V 
nickel-cadmium  batteries.  Length  of  service  from  each 
charging will depend on the type of work you are doing.
The batteries for this product have been designed to provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. Do not disassemble battery pack 
and  attempt  to  replace  the  batteries.  Handling  of  these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:
For lithium-ion batteries:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F and away from moisture. 

  Store battery packs in a 30%-50% charged condition.

  Every  six  months  of  storage,  charge  the  pack  as 

normal.

For nickel-cadmium batteries:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F. 

  Store battery packs in a “discharged” condition.

WARNING:

When  servicing,  use  only  identical  replacement  parts. 
Use  of  any  other  parts  may  create  a  hazard  or  cause 
product damage.

WARNING:

Always wear safety goggles or safety glasses with side 
shields during power product operation or when blowing 
dust. If operation is dusty, also wear a dust mask.

WARNING:

To  avoid  serious  personal  injury,  always  remove  the 
battery  pack  from  the  product  when  cleaning  or 
performing any maintenance.

GENERAL MAINTENANcE

Avoid  using  solvents  when  cleaning  plastic  parts.  Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with  plastic  parts.  Chemicals  can  damage,  weaken  or 
destroy  plastic  which  may  result  in  serious  personal 
injury.

Only the parts shown on the parts list are intended to be 
repaired or replaced by the customer. All other parts should 
be replaced at an Authorized Service Center.

Содержание P540





























Отзывы: