background image

1

Fig. 8

TRIGGER RELEAsE 

BuTTON

TRIGGER

WARNING:

Keep body to the left of the chain line. Never straddle 
the saw or chain, or lean over past the chain line.

Starting the chain saw:

  Place the chain saw on a flat bare surface and make sure 

no objects or obstructions are in immediate vicinity which 
could come in contact with the bar and chain. 

  Press and hold the trigger release button. This makes the 

trigger operational.

  Press  and  hold  the  trigger,  release  the  trigger  release 

button and continue to squeeze the trigger for continued 
operation.

Stopping the chain saw:

  Release the trigger to stop the chain saw.

  Upon release of the trigger, the trigger release button will 

be automatically reset to the lock position.

This cordless chain saw is not designed for cutting trees 
larger than 5 in. in diameter.
This cordless chain saw is designed for limbing and pruning 
type cutting, as well as cutting trees up to 5 in. in diameter 
only.
Do not attempt to make any cut that would require removal 
of the SAFE-T-TIP

®

.

PREPARATION FOR cUTTING

PROPER GRIP ON HANdLES

See Figures 9 - 11.

Refer to 

Important SaFety InStructIonS

 earlier in 

this manual for appropriate safety equipment.

  Wear non-slip gloves for maximum grip and protection.

  Hold the saw firmly with both hands. Always keep your 

left hand on the front handle and your right hand on the 
rear handle so that your body is to the left of the chain 
line.

STARTING ANd STOPPING THE cHAIN SAW

See Figure 8. 

TRIGGER RELEAsE 

BuTTON

OPERATION

TRIGGER

Содержание P540





























Отзывы: