Ryobi EJS-710QEO, Руководство пользователя

Страница: 13 / 141

GENERAL SAFETY RULES
POWER TOOL USE AND CARE
■
Do not force the power tool. Use the correct
power tool for your application.
The correct power
tool will do the job better and safer at the rate for
which it was designed.
■
Do not use the power tool if the switch does not turn
it on and off.
Any power tool that can not be controlled
with the switch is dangerous andmust be repaired.
■
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
■
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
■
Maintain power tools. Check for misalignment or
bindling of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power
tool for operations different from intended could result
in a hazardous situation.
SERVICE
■
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
■
Check damaged parts. Before further use of the tool,
a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, free running of moving parts,
breakage of parts, mounting and any other part that is
damaged should be properly repaired or replaced by an
authorized service center unless otherwise indicated in
this instruction manual. Have defective switches
replaced by an authorized service facility. Do not use
the tool if the switch does not turn it on and off.
DESCRIPTION
1. Switch
2. Variable Speed Control Selector
3. Lock-on
Button
4. Safety Guard
5. Base
6. Notch
7. Saw
Blade
8. Orbital Adjustment Knob
9. Dust Port
10. Bevel Lock Lever
11. Blade Storage
Area
12. Roller Guide
13. Slot
14. Edge Guide
15. Edge Guide Lock Screw
16. Quick Release Lever
17. Live tool indicator
SPECIFICATIONS
Voltage 230 V ~ 50 Hz
Input Power 710 W
Stroke Per Minute 700 - 3000 min
-1
Stroke Length 26 mm
Max Cutting Capacity:
- Wood 120 mm
- Metal 10 mm
- Aluminum 20 mm
FEATURES
KNOW YOUR SAW
Before attempting to use your saw, familiarize yourself
with all operating features and safety requirements.
ELECTRICAL CONNECTION
Your saw has a precision built electric motor. It should be
connected only to a power supply of the type specified by
its rating plate. Do not operate this tool on direct current
(DC). A substantial voltage drop will cause a loss of power
and overheating. If your tool does not operate when
plugged into an outlet, double-check the power supply.
WARNING
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
9
GB
English
F D E I P NL S DK N FIN GR H CZ RUS PL RO SLO TR HR
EJS-710QEO_20 lgs 8/23/04 10:57 AM Page 9