![background image](http://html1.mh-extra.com/html/ryobi/ebs-1310v/ebs-1310v_user-manual_1505739005.webp)
1
English
GB
FR
DE
ES
IT
NL
PT
DK
SE
FI
NO
RU
PL
CZ
HU
RO
LV
LT
EE
HR
SI
SK
GR
TR
GENERAL SAFETY RULES
WARNING
Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities
contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some
examples of these chemicals are:
-
Lead from lead-based paints.
-
Crystalline silica from bricks and cement and
other masonry products.
-
Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dustmasks that are
specially designed to filter out microscopic dust
particles.
Wear a face mask or dust mask if the cutting
operation generates dust, and connect the hose
connector of vacuum cleaner to the dust pipe
joint.
BELT SANDER SAFETY PRECAUTIONS
■
Hold the tool firmly with both hands.
■
Keep the cord away from the rotating abrasive belt.
■
Keep your hands away from rotating parts.
■
Do not place the tool on a surface while the belt is still
moving since belt rotation will cause it to move, and may
result in the tool being damaged or personal injury.
■
The tool must be used only for dry sanding.
■
Do not continue to use worn or torn abrasive belts.
■
Clamp the work piece if it does not remain stationary
due to its own weight.
■
Turn the tool on before applying it to the work piece.
■
Turn the tool off after it has been lifted away from the
work piece.
SPECIFICATIONS
EBS-9576V EBS-1310V
Input
230 V 50 Hz
230 V 50 Hz
Power 950W
1350W
No load speed
240-400 m/min
240-400 m/min
Belt size
76x533 mm
100x610 mm
Net weight
5.0 kg
6.4 kg
Be sure to check the nameplate on the product,
because the voltage is subject to change depending
on the area in which the product is to be used.
DESCRIPTION
1. Front
handle
2. Sanding
belt
3. Tension release lever
4. Rear
handle
5. Dust
bag
6. Dust
point
7. Lock-on button
8. Switch
9. Tracking
knob
10. Speed dial
11. Front roller
12. Rear roller
13. Adjustment knob
14. Slot holder
STANDARD ACCESSORIES
Dust bag, Abrasive belt.
OPTIONAL ACCESSORIES
G-Clamp, Sanding frame.
APPLICATIONS
Use only for the purpose listed below:
1. Surface finishing for wood.
2. For removal of rust and surface finishing for metal.
NOISE BUILD-UP
Noise (sound pressure level) in the workplace can exceed
85 dB(A). In this case, sound insulation and hearing
protection measure must be taken by the operator.
SWITCH (FIG. 1)
This tool is started and stopped by squeezing and
releasing the trigger (8).
For continous operation, press the lock-on button (7)
while trigger is being squeezed. Squeeze trigger again to
release the lock.
The belt speed can be freely adjusted from 240 to 400 m/
min by turning the speed adjusting dial (10) (EBS-9576V
/ EBS-1310V) (A = lowest speed / F = highest speed)
961067431-01_EBS-9576V&EBS-1310V_EU.indd Sec2:1
961067431-01_EBS-9576V&EBS-1310V_EU.indd Sec2:1
2010.4.21 11:32:20 AM
2010.4.21 11:32:20 AM