GENERAL SAFETY RULES
■
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power
tool for operations different from intended could result
in a hazardous situation.
BATTERY TOOL USE AND CARE
■
Ensure the switch is in the off position before
inserting battery pack.
Inserting the battery pack
into power tools that have the switch on invites
accidents.
■
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
■
Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
■
Keep battery contact away from all metal objects.
Shorting the battery terminals may cause burning or
fire.
■
Keep the power tool clean and dry.
Clean with
solvent free cleaning products only. Do not use
petroleum based products such as petrol or white
spirit.
SERVICE
■
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
■
Always wear safety goggles and a dust mask
when sanding, especially sanding over-head.
■
The machine is not suitable for wet sanding.
■
Do not use sanding paper larger than needed.
Extra paper extending beyound the sanding pad can
also cause serious lacerations.
SPECIFICATIONS
Motor 18V
Orbit Diameter
1.6 mm.
No Load Speed
10,000 min
-1
Pad size
125 mm
Battery pack
BPP-1815M/BPP-1817M
(Not Included)
Charger
(Not Included)
DESCRIPTIONS
1. Hook-and-loop sanding disc
2. Switch
3. On ( I )
4. Off ( O )
5. Battery pack (Not Included)
6. Latches
7. Depress latches to release battery pack
8. Backing pad
OPERATION
WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second issufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating products. Failure to
do so could result in objects being thrown into
your eyes, resulting inpossible serious injury.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the purposes listed below:
■
Sanding on wood surfaces
■
Removing rust from and sanding steel surfaces
7
GB
English
F
D
E
I
P
NL
S
DK
N
FIN
GR
H
CZ
RUS
PL
RO
SLO
TR
HR
BC-1815S/BC-1800
BCL14181H/BCL14183H