background image

RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD.

GUARANTEE

RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD.

A.B.N. 98 002 277 509  

SYDNEY: 

359-361 Horsley Road, Milperra, N.S.W. 2214.

Contact during normal business hours.

 Tel: (02) 9792 9800 - Fax: 1800 807 993 - www.ryobi.com.au

   

RYOBI NEW ZEALAND PTY. LTD. 

       AUCKLAND:

 27 Clemow Drive, Mt Wellington, N.Z.

 Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz

Contact during normal business hours.

Subject to the guarantee condition below, this Ryobi tool 
(hereinafter called “the product”) is guaranteed by Ryobi 
(hereinafter called “the Company”) to be free from 
defects in material or workmanship for a period of 24 
months from the date of original purchase covering 
both  parts  and  labour.  Under  the  terms  of  this 
guarantee,  the  replacement  shall  be  the  opinion  of 
the Company or its authorised agent. Should service 
become  necessary  during  the  warranty  period, 
the  owner  should  contact  the  RYOBI  HELPLINE 
1300  361505, or  the  Ryobi  retailer  from  where  the 
product was purchased.In order to obtain guarantee 
service, the owner must present the sales docket and 
Guarantee Certificate to confirm date of purchase. This 
product is sold by the dealer or agent as principal and 
the dealer has no authority from the Company to give 
any additional guarantee on the Company’s behalf 
except as herein contained or herein referred to.

Guarantee Conditions

This guarantee only applies provided that the Product 
has been used in accordance with the manufacturer’s 
recommendations under normal use and reasonable 
care  (in  the  opinion  of  the  Company)  and  such 
guarantee  does  not  cover  damage,  malfunction  or 

failure  resulting  from  misuse,  neglect,  abuse,  or 
used for a purpose for which it was not designed 
or  is  not  suited  and  no  repairs,  alterations  or 
modifications have been attempted by other than 
an Authorised Service Agent.  This guarantee will not 
apply if the tool is damaged by accident or if repairs 
arise from normal wear and tear. 
The Company accepts no additional liability pursuant to 
this guarantee for the costs of travelling or 
transportation of the Product or parts to and from the 
service dealer or agent - such costs are not included 
in this guarantee.
Certain legislation, including the Trade Practices Act, 
1974 (as amended) and other state and territorial laws 
give rights to the buyer and impose liability on the seller 
in certain circumstances. Nothing herein shall have the 
effect  of  excluding,  restricting  or  modifying  any 
condition, guarantee, right or liability imposed, to the 
extent only that such exclusion, restriction or 
modification would render any term herein void.

BRISBANE: 

                     All enquiries Tel : 1300 361 505

TOWNSVILLE:

                    All enquiries Tel : 1300 361 505

MELBOURNE:

 

             960 Stud Road, Rowville,Vic. 3178

                                                           

  

Tel : (03) 9764 8656

HOBART:

                

       

 

All enquiries Tel : 1300 361 505

ADELAIDE:

                

      

  

All enquiries Tel : 1300 361 505

PERTH:

         33-35 Sorbonne Cres., Canning Vale,W.A. 6155.           

Tel : (08) 9455 7775

Purchased From
Address Of Dealer 
Date                                  Model No                                     Serial No

This Guarantee Form Should Be Retained By The Customer At All Times

For your record and to assist in establishing date of purchase (necessary for in-guarantee service)
     please keep your purchase docket and this form completed with the following particulars.

Present  This Form With Your Purchase Docket  When Guarantee Service Is Required.

Содержание AP13AK















Отзывы: