background image

6

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product. 

SYMBOL 

SIGNAL 

MEANING

DANGER:

 

WARNING:

CAUTION:

CAUTION:

Indicates  an  imminently  hazardous  situation,  which,  if  not  avoided,  will 
result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could 
result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result 
in minor or moderate injury. 

(Without Safety Alert Symbol) Indicates a situation that may result in prop-
erty damage.

SERVICE

This unit has no serviceable parts. If the unit fails due to 
normal wear and tear within two years of purchase, return 
with original receipt for a replacement unit at no charge. Call 
1-800-525-2579 for your nearest 

AUTHORIZED SERVICE 

CENTER

.

WARNING:

To avoid serious personal injury, do not attempt to use this 
product until you read thoroughly and understand com-
pletely the operator’s manual. If you do not understand 
the warnings and instructions in the operator’s manual, 
do not use this product. Call Ryobi customer service for 
assistance.

WARNING:

SAVE THESE INSTRUCTIONS

The operation of any power tool can result in foreign objects being thrown into your eyes, which can 
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or 
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision 
Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye 
protection which is marked to comply with ANSI Z87.1.

Содержание AIRGRIP EZ REACH ELB001















Отзывы: