![background image](http://html.mh-extra.com/html/ryobi/4060300/4060300_operators-manual_1505703002.webp)
2
Introduction....................................................................................................................................................................... 2
Rules For Safe Operation ................................................................................................................................................. 2
Symbols............................................................................................................................................................................ 3
Unpacking......................................................................................................................................................................... 4
Loose Parts ...................................................................................................................................................................... 4
Tools Needed.................................................................................................................................................................... 5
Assembly .......................................................................................................................................................................5-8
Parts Ordering / Service ................................................................................................................................................. 10
TABLE OF CONTENTS
The operation of any tool can result in foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection
which is marked to comply with ANSI Z87.1.
WARNING:
INTRODUCTION
Look for this symbol to point out important safety precautions. It
means attention!!! Your safety is involved.
This Long Miter/Rip Fence kit has many features for making
the use of this product more pleasant and enjoyable. Safety,
performance, and dependability have been given top priority
in the design of this product making it easy to maintain and
operate.
WARNING:
Do not attempt to use this product until you read
thoroughly and understand completely the operator’s
manual. Pay close attention to the safety rules, including
Dangers, Warnings, and Cautions. If you use your
product properly and only as intended, you will enjoy
years of safe, reliable service.
Safe operation of this accessory requires that you read and
understand this operator's manual, the operator’s manual for
the table saw and all labels affixed to the tool.
READ ALL INSTRUCTIONS
KNOW YOUR ACCESSORY.
Read the operator's manual
carefully. Learn the product's applications and limitations
as well as the specific potential hazards related to this
product.
KEEP THE WORK AREA CLEAN.
Cluttered work areas
and work benches invite accidents.
DO NOT
leave tools
or pieces of wood on the saw while operating.
ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS.
Everyday eyeglasses have only impact-
resistant lenses; they are
NOT
safety glasses.
DO NOT USE THIS PRODUCT WITH OTHER EQUIP-
MENT
or for other purposes.
ALWAYS DISCONNECT THE SAW FROM THE POWER
SUPPLY BEFORE ASSEMBLING THIS KIT.
Make sure
the switch is off when reconnecting the saw to a power
supply.
BEFORE MAKING A CUT, BE SURE ALL ADJUST-
MENTS ARE SECURE.
SAVE THESE INSTRUCTIONS.
Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.
RULES FOR SAFE OPERATION
WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals
are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.