Ryobi 155VP Скачать руководство пользователя страница 3

WARNING:

When using battery trimmers /

blowers, basic safety precautions should
always be followed to reduce the risk of fire,
electric shock, and personal injury. Carefully
read and understand the entire Operator's
Manual before using your trimmer. Pay close 
attention to the Operating Instructions and
Safety Warnings.

READ ALL INSTRUCTIONS

BEFORE OPERATING

• Read the instructions carefully. Be familiar with the

controls and proper use of the unit.

• Do not operate this unit when tired, ill, or under the

influence of alcohol, drugs, or medication.

• Inspect the unit before use. Replace damaged parts.

Check for battery leaks. Make sure all fasteners are in
place and secure. Replace cutting attachment or
blower parts that are cracked, chipped, or damaged.
Make sure the cutting attachment is properly installed
and securely fastened. Be sure the cutting attachment
shield is properly attached, and positioned as
recommended. Failure to do so can result in personal
injury to the operator and bystanders, as well as
damage to the unit.

• Avoid dangerous environments. Never operate your

unit in damp or wet conditions. Moisture is a shock
hazard.

• Do not use the unit in the rain.

• Do not handle the unit with wet hands.

• Use only 0.080 in (2.03 mm) diameter genuine Ryobi

replacement line. Never use metal-reinforced line,
wire, or rope, etc. These can break off and become a
dangerous projectile.

• Children and teens under the age of 15 must not use

the unit, except for teens guided by an adult.

• Be aware of the risk of injury to the head, hands and

feet.

RULES FOR SAFE OPERATION

3

DANGER

: Failure to obey a safety warning

will result in serious injury to yourself or to
others. Always follow the safety precautions
to reduce the risk of fire, electric shock, and
personal injury.

WARNING

: Failure to obey a safety warning

can result in injury to yourself and others.
Always follow the safety precautions to
reduce the risk of fire, electric shock, and
personal injury. 

CAUTION:

Failure to obey a safety warning

may result in property damage or personal
injury to yourself or to others. Always follow
the safety precautions to reduce the risk of
fire, electric shock, and personal injury.

The purpose of safety symbols is to attract your 
attention to possible dangers. The safety symbols, and
their explanations, deserve your careful attention and
understanding. The safety warnings do not by 
themselves eliminate any danger. The instructions or 
warnings they give are not substitutes for proper 
accident prevention measures.

SYMBOL

MEANING

SAFETY ALERT SYMBOL:

Indicates

danger, warning, or caution. Attention is
required in order to avoid serious personal
injury. May be used in conjunction with other
symbols or pictographs. 

NOTE:

Advises you of information or instructions vital

to the operation or maintenance of the equipment.

• IMPORTANT SAFETY INSTRUCTIONS •

• Clear the area to be cut before each use. Remove all

objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the cutting attachment. Clear the area of children,
bystanders, and pets. At a minimum, keep all 
children, bystanders and pets outside a 50 feet (15 m)
radius; there still may be a risk to bystanders from
thrown objects. Bystanders should be encouraged to
wear eye protection. If you are approached, stop the
motor and cutting attachment immediately.

SAFETY WARNINGS FOR BATTERY TRIMMERS

• Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when
tool is not operating. Take care when performing
maintenance, service, or changing the trimmer add-on
attachment or blower add-on attachment.

• Remove or disconnect the battery before servicing,

cleaning, changing add-on attachments or removing
material from the unit.

• Use only the charging station provided with your unit

or optional Battery & Charger Accessory Kit, model
300028. Do Not substitute any other charging means.
Use of another charging means could cause batteries
to explode, resulting in possible serious personal
injury.

• Do not charge unit in rain or in wet locations.

• Your unit should be charged in a location where the

temperature is more than 50˚F (10˚C) but less than
100˚F (38˚C).

SAFETY WARNINGS FOR CHARGING STANDS
AND LEAD-ACID BATTERIES

• Before using charging stand, read all instructions and

cautionary markings in this manual, on charging stand,
and product using charging stand.

• Do not expose charger to rain or snow. 

• To reduce risk of injury, charge only sealed lead-acid

rechargeable batteries. Other types of batteries may
burst, causing personal injury and damage. 

Содержание 155VP



















Отзывы: