RYNO WORX RY10MA, Руководство пользователя

Страница: 27 / 27

4) The wind is continuously
blowing out your flame, not
allowing your machine to build
heat quickly
4) Move equipment to a less
windy area or try turning
equipment so that the torch is not
exposed to the wind
The Control valve is occasionally
dripping at the transfer tube
The flow valve is designed with
tight tolerances and designed to
be removable for easy cleaning. It
is not uncommon for your flow
valve to have an occasional drip
where it meets the transfer tube
when the melter is warm.
No solution necessary, the flow
valve was designed with
tolerances which prevent it from
binding from the intense heat of
the torch. An occasional drip is
perfectly normal when the
machine is fully heated.
26