RYCO RYCS10 CUT-OFF SAW
6
10. USAGE BY OPERATORS
The RYCS10 Cut-Off Saw should only be used by persons who are familiar with the correct and safe usage of this machine as outlined within
the contents of this operations manual.
To avoid personal injury, all hands, feet, loose clothing, jewellery, and all other body parts must be kept well away from the RYCS10 Cut-Off
Saw during operation.
Do not exceed the operational rating of the RYCS10 Cut-Off Saw as overloading will cause equipment failure and potential injury.
11. SAFE OPERATION REQUIREMENTS
Before safely operating the RYCS10 Cut-Off Saw, operators must:
• Read and understand the contents of this operation manual
• Be fully trained in its operation
• Be fully competent in its operation
• Be fully alert
• Not be fatigued or affected by medication, alcohol, or drugs; and,
• Ensure the working area is well properly lit and ventilated.
12. CONDITIONS OF USAGE
The RYCS10 Cut-Off Saw must be installed and only used within the following conditions:
• Supply voltage: 0.9 - 1.1 nominal supply voltage
• Source frequency: 0.99 - 1.01 nominal frequency
• Ambient temperature: 5°C - 40°C (40°F - 104°F)
• Altitude: shall be at altitudes up to 1000m above sea level
• Relative humidity: not exceed 50% at 40°C (104°F); and,
• Atmosphere: free from excessive dust, acid fumes, corrosive gases, and salt.
The RYCS10 Cut-Off Saw should not be exposed to any:
• Direct sunlight, heat rays or flames
• Damp or wet conditions, including being exposed to rain and/or moisture
• Explosive environment
• Equipment with a temperature above 50°C (122°F); or any,
• Area where children, animals, and/or other adults are in (close) proximity.
The RYCS10 Cut-Off Saw should not:
• Be modified in a way; nor,
• Be used for any application other than for which it was intended as listed within the contents of this operations manual.
For optimum performance, the RYCS10 Cut-Off Saw must be kept and in a continually clean and safe working order.
USAGE GUIDELINES