18. SAFE REMOVAL OF THE WASTE COLLECTION TRAY
Remove any excess hose cutting waste from the Waste Collection Tray of the RYCS10 Cut-Off Saw by following the procedure below:
1. Ensure all power to the RYCS10 Cut-Off Saw is disconnected from its
source.
2. Ensure the EMERGENCY STOP button is depressed.
3. Unscrew the black screw until completely removed
4. Remove and empty the Waste Collection Compartment (see direction
of arrow).
5. Ensure all waste is correctly disposed in line with local environmental
regulations.
6. Insert the Waste Collection Compartment back into the RYCS10 Cut-Off
Saw before re-tightening the black screw.
19. SAFE TRANSPORTATION
The RYCS10 Cut-Off Saw should be transported via its secure wooden packing box fitted with carry slings whilst adhering to all
Occupational, Health, and Safety (i.e., OH&S) regulations.
After unpacking, and due to its net weight of 45kg, the RYCS10 Cut-Off Saw should only be lifted using an approved, appropriately rated
lifting sling.
20. SAFE MACHINE STORAGE
If not be operated for long periods, the RYCS10 Cut-Off Saw should be:
• Stored in its secure wooden packing box
• Stored in an environment free of dust, exposed sunlight, and moisture; and,
• Have all power fully disconnected.
21. CORRECT DISPOSAL OF PACKAGING
Check local environmental regulations before disposing of any packing or shipment materials, including investigating opportunities to
avoid disposal within landfill.
RYCO RYCS10 CUT-OFF SAW
12
MAINTENANCE AND INSPECTION
Figure 8 – Waste Collection Tray