RVS RVS-77555, Инструкция по эксплуатации

Страница: 28 / 42

Rear View Safety
28
Step 4: Install the main unit
• The main unit is usually put in the central control room or behind the tool box.
Step 5: Check the wiring connection before powering on
• Make sure all cables are well connected before powering on.
Step 6: Check basic function of the system
• Images from 4 cameras can be displayed on the screen
• Surround view is on the left and single view on the right
• Single view could be switched by remote if needed.
Step 7: Debug the image calibration
• For details, please refer to the Calibration Steps in next pages.
Calibration Steps
Step 1: Lay a rectangular frame around the vehicle
• Lay the lines parallel and as close as possible to the vehicle body while making sure each line could
completely be shown in the according single view;
• Zebra-strip tapes (provided as standard accessory) or rectangular laser gradienter is suggested;