RVR Energy Technology CAHA Midi 340 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 48

RVR Energy Technology CAHA Midi 340 Скачать руководство пользователя страница 14

14

CAHA Midi

Installation, Usage and Maintenance Instructions

5.3 USER MENU

By pressing the “menu-button” the display will show the text as given in the figure below.

By pressing the button marked “3”in the figure shown,

the user menu is accessed.

Pressing the button rmarked “5” returns back to the

main screen.

By pressing the button marked “4”, the installer menu is

accessed.

In the user menu the following options will be shown :

1. HEATING

2. DOMESTIC HOT WATER

3. HOLIDAY

4. MAINTENANCE

5. SETTINGS

6. CHIMNEY-SWEEPER

7. DIAGNOSTICS

By pressing up and down (R1-C2 and R3-C2) one of the six options as shown above will highlight the desired parameter. By

pressing the OK button (R2-C2) the chosen option will be selected.

Once an option has been slected it is possible to change the parameters corresponding with the chosen option.

5.3.1 PARAMETER/VALUE SETTING

Pressing the up and down (R1-C2 and R3-C2) buttons will highlight the desired parameter. Pressing the OK button (R2-C2)

will allow the chosen parameter to be modified. This is shown below.

The actual value can be changed by pressing the R1-C1

and R2-C1 buttons.

The changed value can be confirmed by pressing the

OK (R2-C2) button.

Pressing the back (R3-C1) button leaves the actual

displayed parameter.

If there are more parameters shown in the parameter

value area (4) the desired parameter can be selected by

pressing the up and down ((R1-C2 and R3-C2) buttons.

5.3.2 PARAMETERS ACCESSIBLE BY USER

An overview of the parameters accessible by the user is given on the next pages

«
...
12
13
14
15
16
...
»

Содержание CAHA Midi 340

















































Отзывы:

Нет отзывов