Ruwido M_2, Руководство по эксплуатации, Страница: 12 / 96

12
Manual TV set programming
1) Switch your TV set on.
2) Look up the brand of your TV set under “TV” in the code list. Single or multiple 4 digit codes are shown for
each brand.
Note :
On our website www.ruwido-consumer.com you can use the code search function in the support area to enter
your set model number directly in order to obtain the appropriate code. This will save you having to test
several codes.
3) Press and hold the TV Standby button (
tv
) until the signal LED ( ) fl ashes twice.
4) Use the number keys to enter the fi rst four-digit code from the code list for the brand that you have selected.
The signal LED ( ) fl ashes twice to indicate that the code has been accepted.
5) Test the functionality of your remote control using the TV standby button (
tv
) and the AV button (
av
).
6) If the TV set does not respond, or only responds partially to the commands, repeat steps 3 to 5 using the next
code from the code list.
7) If the TV set responds properly to all functions, your m_2 is correctly programmed and can be used. Please
note the code that was used for future reference.
Manual programming for the satellite receiver and the DVB-T (Freeview)/cable-box
(STB)
1) Switch your satellite receiver or DVB-T (Freeview)/cable-box (STB) and TV set on.
2) Look up the brand of your unit under “STB” in the code list. Single or multiple 4 digit codes are shown for each
brand.
Note :
On our website www.ruwido-consumer.com you can use the code search function in the support area to enter
your set model number directly in order to obtain the appropriate code. This will save you having to test
several codes.
3) Press and hold the STB Standby button (
stb
) until the signal LED ( ) fl ashes twice.
4) Use the number keys to enter the fi rst 4-digit code from the code list for the brand that you have selected. The
signal LED ( ) fl ashes twice to indicate that the code has been accepted.
5) Now test the individual buttons on your remote control for function, starting with the STB Standby button
(
stb
), volume buttons (
vol
/
vol
), and then with the buttons 1 to 43 (in accordance with functional
description table). The AV button (
av
) and TV Standby button (
tv
) are not tested.
6) If the unit does not respond, or only responds partially to the commands, repeat steps 3 to 5 using the next
code from the code list.
7) If the unit responds properly to all functions, your m_2 is correctly programmed and can be used. Please note
the code that was used for future reference.
My programming codes to use
TV STB
Automatic programming the TV set according to brand
As an alternative, and if the correct code for your TV set cannot be found for manual programming, you can use
the automatic search function by brand for programming.
1)
Switch your TV set on.
2) Look up the brand of your TV set in the brand list in the appendix to this instruction manual. There is a 3-digit
brand code for each brand.
3) Press and hold the TV Standby button (
tv
) until the signal LED ( ) fl ashes twice.
4) Use the number buttons to enter the code 1 0 0 3 . The Signal LED ( ) fl ashes twice to con fi rm that the
search mode has been activated.
5) Use the number keys to enter the three-digit brand code from the brand list for the brand that you have
selected. The signal LED ( ) fl ashes twice to indicate that the code has been accepted.
BA m_2 Universal, 135x215 mm CS6.indd 12 BA m_2 Universal, 135x215 mm CS6.indd 12 11.09.2012 15:44:37 11.09.2012 15:44:37