Rustibus 200-4000 Скачать руководство пользователя страница 10

Страница: 10 / 26

Genuine Rustibus® parts only!

BUILDING A DISPOSABLE CHAIN DRUM FROM SCRATCH

DISPOSABLE CHAIN DRUM FOR RUSTIBUS® 2000

Information guide for use and installation of the system.

The rotation unit to the

Rustibus® 2000

is now more efficient with the new Disposable Chain Drum system.

This new one-piece unit is delivered complete and therefore does not require further replacement of spare parts.

Simply use it until it is totally destroyed and then replace it with a new one.

The

Rustibus® 2000

should only be used on a flat horizontal surfaces. All sorts of obstacles should be avoided at

all times such as sockets,edges etc. De-scaling should be done along side weldings NOT across. If one of the chain

links / pins should brake and create an unbalance in the machine, simply cut the chain links on the opposite side of

the broken one.

You are then able to fasten it all

in place with the TWO nuts and

washer. First place the washer

(D)

We recommend that you use Loctite.

Part Numbers:

200- 0156

- Disposable Chain

Drum Set

200- 2300

- Shaft for Head

(Incl.Washer & Nuts)

The next step is to place the other

Disposable Chain Cassettes on the

shaft, making sure the rivet heads

(B)

are facing in the same

direction towards the base and

that the Cleft sections

(C)

line up

with each other accordingly.

Firstly place one of the Chain

Cassettes on the shaft until it

contacts with the shaft base

(A)

- The order of assembly is clearly

shown in pictures

1 – 6

When mounting the Chain

cassettes on the shaft make sure

that the rivets of each cassette are

in contact with those of the next,

this ensures that ALL the chain

links are free and not caught

between the Chain Cassette

sections.

Machine may vary from pictures

Содержание 200-4000



























Результаты поиска

Содержание 200-4000

Отзывы:

Похожие инструкции для 200-4000

Бренды по названию

Популярные бренды

Rustibus 200-4000, Руководство по эксплуатации

Результаты поиска

Содержание 200-4000

Отзывы:

Похожие инструкции для 200-4000

Бренды по названию

Популярные бренды