6
ENG
BEFORE FIRST USE
To ensure the fi rst cup of coff ee tastes excellent, you should rinse the espresso machine
with warm water as follows:
1. Pull out the water tank of the espresso machine. Pour water into water tank, the water
level should not exceed the “
MAX” mark in the tank, then insert it into the espresso
machine.
2.
Note: The appliance is supplied with a removable tank for easy cleaning, you can fi ll
the tank with water fi rst, and then insert the tank into the appliance.
3. Place the basket into the portafi lter (no coff ee in the basket), then put the portafi lter
into the grouphead (see Fig.1) and turn it anticlockwise until it is fi xed tightly
(see Fig.2 and Fig.3).
4. Place an espresso cup you have prepared on the drip plate. Make sure the steam knob
is at the “
O” position.
5.
Note: As the appliance is not equipped with any cup or jug, prepare your own jug or cup.
6. Connect into power source, press down the ON/OFF button “ ” to turn on the unit.
The power indicator (red) will be illuminated.
7. Press down the pump control button “ ”, the pump will pump water, when there is
water fl owing out and close the pump by pressing the pump control button “ ” again.
8. Make sure the steam button “
” is at the higher position and wait for a moment,
the appliance will begin preheating until the coff ee indicator (green) illuminates,
it means that the preheating is fi nished.
9. Press down the pump control button “ ” again, and water will fl ow out.
10. After water has fl own for 1 minute, press the pump control button “ ”, you can
pour out the water in each container then clean them thoroughly, now you can start
brewing coff ee.
Note: There may be noise when pumping the water for the fi rst time, it is normal, as
the appliance is releasing the air in the appliance. After about 20s, the noise will disappear.
Grouphead
Fig. 1
Fig. 2
Fig. 3
IM_903014050101_Espresso_machine_v2.indd 6
2019-10-03 13:57