Russound TCH1, Руководство по установке

Страница: 6 / 20

6 Russound TCH1 Installation Manual
Basic installation
Note: Connect all cables from TCHS1 to controller and router BEFORE
powering the unit.
What you will need:
Home network WiFi router ( • Note: A wireless access point to the
home network must be enabled in the setup process for proper use
by iPhone or iPod touch devices)
RNET enabled controller
•
PC with browser capability •
iPhone or iPod touch •
INSTALLATION ANd CONNECTIONS
Connect the TCHS1 to your home network router via a CAT-5 wired 1.
Ethernet (LAN) connection (recommended), or attach the antenna
to communicate with the router via a WiFi connection. The TCHS1
must be on the same network as any Ethernet connections to RNET
controllers or components.
Connect the supplied adapter to the USB port on the TCHS1, and
2.
connect the serial extender cable to the RS232 port on the RNET
controller (on ACA-E5 multiroom controller, use RS232 port 'A'). If
it is a multiple controller system, the TCHS1 must be connected to
controller #1.
The RNET LED on the front lights to indicate an active RNET
3.
connection. There may be a delay before the LED lights to show a
change in state.
Recommended configuration
(CAT-5 connection between Network Router and TCHS1)
USB/Serial adapter
CAT-5 cable
Controller
Home Network Router
TCHS1 Interface
Serial extender cable
USB Port LAN Ports LAN Port