Russound TCH1, Руководство по установке

Страница: 11 / 20

11 Russound TCH1 Installation Manual
Controller Setup
Note: the system's controller ID, source assignments and room names
should be readily available for controller and source setup.
Select "Controller Setup" from the Main menu under "System."
Select the controller type for your specific configuration. 1.
Enter unique zone names for each zone in use. Leave zone names 2.
blank for unassigned zones to prevent them from showing up on
the Zone List page of the user interface.
Click Save Changes.
3.
Source Setup
Enter a source name and source type for each source. If the 1.
source does not support RNET, the source type should be set to
"Standard IR."
When a source input is not being used, leave the source name blank
2.
and select ‘None’ in the corresponding source type combo box.
Click Save Changes.
3.
CONFIGURATION
Controller Type
Choose appropriate
Zone Names
Enter names - No duplicates
Save Changes
(Not shown)
Must be clicked to save information
Source Name
Enter appropriate
No duplicates
Source Type
Choose appropriate -
enter "Standard IR" for
non-RNET sources
Save Changes
Must be clicked to save
information