The electronic round counter
The electronic round counter has already been fitted with a battery. It is inserted into the frame of the body and can be easily
taken out for battery control or change. For that purpose you stick a screwdriver into the little gap at the side of the round
counter and carefully lift it up. If necessary you can loosen the cable connector.
When reinstalling make sure that the cable connector is in the right place and that the round counter is correctly inserted.
By pressing the red start button or simply by moving the pedal, the round counter is activated. It offers the following display
functions, which can be selected by repeatedly pressing the red button:
Scan:
In this mode the display changes automatically between the different display functions, here you have got a successive
overview of all work out results.
Time:
In this mode the duration of the current work out is displayed. The maximal duration is 99:59 min.
Count:
In this mode you are shown the completed rounds of the current work out.
Total Count:
In this mode all completed rounds are added up. You can reset the Count to 0 by taking out the battery and put-
ting it back in again.
Calories:
In this mode the burnt calories of the current work out are displayed. This is only an approximate value.
Please replace the battery in case the display can not be read clearly anymore.
After a disuse of approx. 5 minutes the round counter switches off automatically.
Cleaning
The body and the pedals can be cleaned with a damp cloth. Do not use any aggressive cleaning agents. Afterwards use a soft
cloth for wiping. Make sure that no water enters the equipment.
Storage
During disuse you should store the Mini-Trimmer in a dry place.
Disposal
The battery should be separately disposed from the Mini-Trimmer. Both should not be put into the domestic waste.
For the exact regulations you should contact your local waste management enterprise.
Technical data
• Length: approx. 40 cm • Width: approx 35 cm • Height: approx. 29 cm • Weight: approx 5,2 kg
