Russell Hobbs RHST102, Инструкции и гарантия, Страница: 9 / 12

cHaNGING THE aNTI-ScaLE caRTRIDGE
• This is best done when refilling the reservoir, as you’ll have to top up the reservoir after
fitting the new cartridge anyway.
• After removing the reservoir from the base unit, simply lift out the old anti-scale cartridge,
drop in the new one, then top up the reservoir.
REPLacEMENT aNTI-ScaLE caRTRIDGES
• Have the Model No. on hand, as we won’t be able to help you without it. It’s on the rating
plate (usually underneath the product).
• Contact Customer Service for prices and replacements.
DEScaLING THE BOILER
• Descale the boiler every time you replace the anti-scale cartridge.
• Leave it for a minimum of 4 hours to cool down completely (overnight is best).
• Mix 1 tablespoon of white vinegar and 2 tablespoons of warm water in a jug.
• It’s best to do this on top of a towel on the work surface in the kitchen, as you’re likely to
spill a bit, and you’ll need access to water and a sink (or a basin).
• Remove the reservoir (you’re going to turn the base unit upside down).
• Set the iron down on the work surface – take care not to scratch the soleplate.
• Turn the base unit upside down.
• Unscrew the cap.
• Turn the base unit over, and empty the boiler into the sink.
• Pour the vinegar/water mix into the hole.
• Replace the cap and shake the base unit from side to side.
• Leave it for half an hour, then unscrew the cap again.
• Turn the base unit over, and empty the boiler into the sink.
• Now rinse, to remove scale and vinegar:
a) Unscrew the cap
b) Turn the base unit over, and empty the boiler into the sink
c) Pour fresh water into the hole
d) Replace the cap
• Repeat points a, b, c and d till the water that comes out is clear, free of scale particles,
and doesn’t smell of vinegar.
• Finally, empty the boiler, replace the cap, turn the base unit upright, and store it away.
• Don’t let liquid get into the grille round the hole – if you do, turn the base unit upright, and
leave it somewhere warm for 12 hours, to dry out.
Products returned under guarantee with faults due to scale will be subject to a repair charge.