Russell Hobbs RHST102, Инструкции и гарантия, Страница: 8 / 12

NO waTER
• When the water level gets low, the low water light will flash.
• Fill the reservoir (see “FILLING”), then prime the iron again.
aFTER USE
• Sit the iron on top of the base unit and turn the temperature control to •.
• Press and release the iron switch and the boiler switch to turn them off.
• The boiler and iron lights will go out.
• Unplug the base unit (switch the socket off first, if it’s switchable).
• Top up the reservoir
• This’ll give you a head start next time you use the iron
• It will help to avoid inadvertently running out of water
• Let the iron cool down completely before cleaning it, moving it, or storing it away.
HOLIDayS
• If you leave the iron for more than a week, empty the reservoir, to avoid mould.
caRE aND MaINTENaNcE
• Unplug the base unit, and let it and the iron cool down fully.
• Wipe outer surfaces with a damp cloth. If necessary, use a little washing-up liquid.
• Remove spots from the soleplate with a little vinegar.
• Take care not to scratch the soleplate.
• Don’t put the iron in water or any other liquid.
• Don’t use harsh or abrasive cleaning agents or solvents.
THE aNTI-ScaLE caRTRIDGE
• To reduce scale build-up, you must change the anti-scale cartridge regularly. How often
depends on the hardness of your water, and how much you use the iron.
• An average user, steam ironing for 2 hours a week, should change the cartridge every 4
to 6 weeks in a soft water area, or 2 to 3 weeks in a hard water area.
wHaT TO waTcH FOR
• Keep an eye on the steam output. If this reduces substantially, then it may be time to
replace the anti-scale cartridge.
• Look out for flecks of scale on your clothes. If scale is getting through the iron, it’s time to
replace the anti-scale cartridge.