POWER DOWN
•
Turn the speed control to ‘
0’ (off position) and wait till the blades stop moving before
removing the lid from the jug, or removing the jug from the motor unit.
•
To remove the jug, turn it clockwise until the spout points along the head of the Bench Mixer.
•
Lift the jug off the drive.
HOT LIQUIDS
CAUTION: Pouring hot liquids into a cold blender jug could cause the jug to break.
•
Before pouring into the jug, let the liquid cool down to a temperature you can comfortably
handle – i.e. keep the liquid temperature below 40°C.
THE BLADE UNIT
REMOVING THE BLADE UNIT
•
Remove the lid and turn the jug upside down.
•
Use the grips to turn the blade unit anti-clockwise to release the latches on the blade unit
from the tabs on the inside of the jug.
•
Lift the blade unit out of the jug.
CAUTION: The cutting blades are very sharp. Handle the blade unit with extreme care
and caution.
FITTING THE BLADE UNIT
•
Lower the blade unit into the upturned jug.
•
Use the grips to turn the blade unit clockwise to engage the latches on the blade unit with
the tabs on the inside of the jug.
CARE AND MAINTENANCE
•
Ensure the Bench Mixer is switched off and unplugged before cleaning.
•
Clean as soon after use as possible, to prevent residues setting.
•
Wash the jug and lid in warm soapy water and rinse well. Leave them to drain and air dry.
NOTE: The harsh environment inside the dishwasher may affect the surface finishes. The
damage is cosmetic only, and should not affect the operation of the appliance.
•
Do not put the motor unit in water or any other liquid.
•
Do not use harsh or abrasive cleaning agents or solvents.
•
Ensure the Bench Mixer is switched off and unplugged before cleaning.
•
Clean the Bench Mixer as soon after use as possible to prevent residues setting inside the bowl.
•
Wash the bowl and attachments in warm soapy water, rinse well.
•
Leave them to drain and air dry.
•
You may put the bowl and mixing attachments in a dishwasher.
•
You may put the jug and lid in a dishwasher.
NOTE: the harsh environment inside the dishwasher may affect the surface finishes. The
damage is cosmetic only and should not affect the operation of the appliance.
•
Wipe the external surfaces of the Bench Mixer with a clean damp cloth.
•
Remove the blade unit from the blender, (See ‘Removing the blade unit’ section) and wash
the blade unit in warm soapy water using a nylon brush to clean the blades.
•
Do not immerse the motor unit in water or any other liquid.
•
Do not use harsh or abrasive cleaning agents or solvents.
RHMP1200BL_IB_RB2_111111.indd 11
14/11/11 4:29 PM
