Russell Hobbs RHJ3000, Инструкции и гарантия

Страница: 5 / 20

5
GENERAL USE
BEFORE FIRST USE
• Remove any packaging material and labels.
• Wash the pusher, lid, sieve, separators, strainer, pulp container, cone, jar and blade
assembly in warm, soapy water. Rinse and dry.
• Wipe the motor base with a damp cloth.
• Place the appliance on a dry, firm, level surface, near a power socket.
JUICER (FIG A)
The juicer attachment can be used to extract juice from fruit,
vegetables and even leafy greens. The feed chute is 75mm
wide for whole fruit juicing.
ASSEMBLY
1. Line up the
d
on the juicer separator with the on the
motor base. Turn the separator clockwise to line up the
d
with the .
2. Put the sieve into the separator and press it down onto the
drive shaft.
3. Line up the
d
on the lid with the on the motor base.
Turn the separator clockwise to line up the
d
with the .
4. Fit the pulp container under the left hand side of the lid.
5. Put the multi-purpose jar under the spout to collect the
juice.
6. Fit the pusher into the tube.
USING
1. Check that the appliance is switched off (
O
).
2. Put the plug into the power socket.
3. Turn the appliance on (
I
).
4. Remove the pusher and drop the ingredients down the feed chute.
5. The feed chute is wide enough for most whole fruits and vegetables but larger
ingredients may need to be cut to fit.
6. Replace the pusher and use it to push the ingredients gently down the feed chute.
7. Once finished, turn off your juicer (
O
).
8. The spout can be turned to face upwards to prevent dripping when you have finished
using the appliance.
9. You can fit the resealable top to the multi-purpose jar if desired for storage or to use the
jar as a drinking bottle.
TIPS
• Buy organically grown produce whenever you can.
• Remove stones from fruit like peaches, plums, mangoes, etc.
• Use good quality, fresh, ripe fruit and vegetables. Soft vegetables or overripe fruit can
make the juice thick and cloudy.
A B
C
e
j
`
f
`
g
`
i
k
l
o
t
u
v
`
`
`
m
l
s
`
r
`
n
`
`
`