READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S IRONING
INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILIAR TO THE
FOLLOWING.
HOW TO FILL WATER
1. Disconnect the iron from the mains supply outlet.
2. Move the Steam Control Knob to position.
3. Open the Water Inlet Cover.
4. Pour water through the water inlet hole.
5.
Fill up to the ‘Max’ level marked on the side of the water tank.
Note:
For best results, it is advisable to use demineralised water or distilled water.
Do not use chemically de-scaled water or any other liquids.
FIRST TIME IRONING
1. Remove any protective films or stickers from the soleplate and the cabinet, if any.
2. Unwind and straighten the power cord.
3.
Fill the water tank, as described in “How to fill water”.
4. Connect the appliance to a suitable mains supply outlet.
5. Turn the Temperature Dial on the iron unit in a clockwise direction to the maximum
position, pilot light glows.
6. Pilot Light goes off when the required temperature is reached.
7. Move the steam control dial to position, steam starts coming out from the
holes in the soleplate.
8. Begin first time ironing with an old towel.
9. When the water tank is empty and there is no more steam produced, the
preparation work is complete. The iron is now ready for proper use.
Temperature Control Setting
.
Acetate
. Elastane
. Polyamide
. Polypropylene
Polyester
Silk
Triacetate
Viscose
Wool
. Cotton
. Linen
