Russell Hobbs RHFP5000 Скачать руководство пользователя страница 6

Страница: 6 / 28

5. Place the lid with the front feed chute latch (black part) to the left of the handle, onto the

workbowl. Align the tabs and lock the lid into place by turning counterclockwise. The lid is
locked when it clicks firmly into place. The lid will only lock when the feed chute is aligned
with the workbowl handle. (B)

Note:

Ensure that the lid is properly locked in. Otherwise the unit will not operate.

6. Place the small food pusher (black) into the large pusher (transparent) and put the

assembly into the lid feed chute (see ‘FEED CHUTE AND PUSHERS’ section in this
manual).

IMPORTANT:

If the food processor does not operate, make sure the workbowl and lid are

properly locked on the base and the large food pusher is fully in place. Au automatic safety lock
causes the food processor to stop working if the large food pusher pops out and/or the lid and
workbowl are not properly locked in place.
7. The unit is now ready to use.

INSERT AND REMOVE THE CENTRE POST

•    The centre post of the large work bowl is removable for easy cleaning.
•    To remove, turn the bowl upside down.
•    Grasp the outer black tabs and turn them counterclockwise as far as possible.
•    To remove the centre post, the whole coupling needs to be pushed out. To help

disassemble, push the centre post from the inside of the bowl upwards.

• To reassemble, place the coupling into the bowl opening and gently push downwards.
• Turn the black tabs clockwise to lock into place.

FEED CHUTE AND PUSHERS

Note:

Before operating the food processor, ensure that the workbowl,

blades and lid are properly assembled on the food processor base.
LARGER FOODS
1. Insert the small food pusher (black) inside of the large food pusher.

Use them together to guide ingredients through the large feed
chute. (C)

Note:

For safety reasons the unit only operates if the large feed chute

is inserted 2.5cm into the feed chute.
SMALLER FOODS OR LIQUIDS
1. Insert the large food pusher into the large feed chute of the lid. (D)

Push down until the large food pusher clicks into place and rests
at the bottom of the feed chute.

2. Place food to be processed in the opening of the large food

pusher. Use the small food pusher to guide ingredients through
the center of the large food pusher. The small food pusher can be
removed to add liquid or additional foods. (E)

Note:

The large food pusher must remain in the large feed chute in

order for the food processor to operate.

Note:

Be sure to lock the workbowl in place before attaching the

blades or discs and lid.

4. Attach your selected blade or disc to the blade shaft in the

bottom of the large workbowl (instructions for individual
discs/blades follow in this manual).

5. Place the lid on top of the workbowl, aligning the tabs and

locking it into place by turning counterclockwise. The lid is
locked when it clicks firmly into place. The lid will only lock
when the feed chute is aligned with the workbowl handle. (B)

USING THE FEED CHUTE AND PUSHERS

Note:

Before operating the food processor, be sure the

workbowl, blades and lid are properly assembled on the food
processor base.
LARGER FOODS

1. Insert the small food pusher inside of the large food pusher.

Use them together to guide ingredients through the large feed
chute. (C)

SMALLER FOODS OR LIQUIDS
1. Insert the large food pusher into the large feed chute of the

lid. (D) Push down until the large food pusher clicks into
place and rests at the bottom of the feed chute.

2. Place food to be processed in the opening of the large food

pusher. Use the small food pusher to guide ingredients through
the center of the large food pusher. The small food pusher can
be removed to add liquid or additional foods. (E)

Note:

The large food pusher must remain in the large feed chute

in order for the processor to operate.

USING THE SPEED CONTROLS

Note:

If the food processor does not run, make sure the workbowl

and lid are properly locked on the base and the large food pusher is
fully in place. There is an automatic safety lock that causes the food
processor to stop working if the large food pusher pops out and/or
the lid and workbowl are not properly locked in place.
The controls are located on the front of the base. See the speed
chart for food processing and speed recommendations. Various
speeds are used for chopping, mixing, and slicing/shredding. When
these functions are selected the processor will run continuously
until the OFF|PULSE button is pressed to stop. (F)

Note:

Be sure to lock the workbowl in place before attaching the

blades or discs and lid.

4. Attach your selected blade or disc to the blade shaft in the

bottom of the large workbowl (instructions for individual
discs/blades follow in this manual).

5. Place the lid on top of the workbowl, aligning the tabs and

locking it into place by turning counterclockwise. The lid is
locked when it clicks firmly into place. The lid will only lock
when the feed chute is aligned with the workbowl handle. (B)

USING THE FEED CHUTE AND PUSHERS

Note:

Before operating the food processor, be sure the

workbowl, blades and lid are properly assembled on the food
processor base.
LARGER FOODS

1. Insert the small food pusher inside of the large food pusher.

Use them together to guide ingredients through the large feed
chute. (C)

SMALLER FOODS OR LIQUIDS
1. Insert the large food pusher into the large feed chute of the

lid. (D) Push down until the large food pusher clicks into
place and rests at the bottom of the feed chute.

2. Place food to be processed in the opening of the large food

pusher. Use the small food pusher to guide ingredients through
the center of the large food pusher. The small food pusher can
be removed to add liquid or additional foods. (E)

Note:

The large food pusher must remain in the large feed chute

in order for the processor to operate.

USING THE SPEED CONTROLS

Note:

If the food processor does not run, make sure the workbowl

Note:

Be sure to lock the workbowl in place before attaching the

blades or discs and lid.

4. Attach your selected blade or disc to the blade shaft in the

bottom of the large workbowl (instructions for individual
discs/blades follow in this manual).

5. Place the lid on top of the workbowl, aligning the tabs and

locking it into place by turning counterclockwise. The lid is
locked when it clicks firmly into place. The lid will only lock
when the feed chute is aligned with the workbowl handle. (B)

USING THE FEED CHUTE AND PUSHERS

Note:

Before operating the food processor, be sure the

workbowl, blades and lid are properly assembled on the food
processor base.
LARGER FOODS

1. Insert the small food pusher inside of the large food pusher.

Use them together to guide ingredients through the large feed
chute. (C)

SMALLER FOODS OR LIQUIDS
1. Insert the large food pusher into the large feed chute of the

lid. (D) Push down until the large food pusher clicks into
place and rests at the bottom of the feed chute.

2. Place food to be processed in the opening of the large food

pusher. Use the small food pusher to guide ingredients through
the center of the large food pusher. The small food pusher can
be removed to add liquid or additional foods. (E)

Note:

The large food pusher must remain in the large feed chute

in order for the processor to operate.

USING THE SPEED CONTROLS

Note:

If the food processor does not run, make sure the workbowl