31
KEEP WARM FUNCTION
After the cooking cycle has completed, the electric pressure cooker automatically enters
into the keep warm mode.
In this mode, the Keep Warm indicator lights will be on.
In standby mode, you may also press the Keep Warm button to turn the Keep Warm
mode/ fumction on.
Note: the Keep Warm temperature is 60
°
C-77
°
C. The preset cycle time for this mode/
function is no longer than 2 (two) hours.
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary.
Always make sure the Pressure Cooker is unplugged, depressurized and completely
cooled down before dismantling.
Clean after each use.
Do not use bleach or other abrasive substances or solvents to clean your appliance as it
can be damaging to the finish.
Use a non-abrasive sponge or damp wash cloth to clean the exterior of the outer body
and the exterior surface of the pressure cooker.
NEVER
immerse the pressure cooker in
any liquids.
Remove the water box/ collector and rinse it thoroughly and let it dry. Clean the upper
body of the main cooker body with a damp sponge or wash cloth.
Clean the lid with warm soapy water, including the seal ring, exhause valve, block proof
cover, vents, float valve and let them dry thoroughly.
The exhaust valve pops off easily by gently reaching underneath it and gently pulling it
upwards. Be careful not to damage supporting structure/ parts under it.
Wash the inner pot with a non-abrasive sponge and allow to air dry or use a towel.
Clean the exhaust valve and the holes with a small brush to ensure smooth flow of steam
during the release cycle.
Let parts dry completely before reassembling.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in
soapy water or mild non-abrasive cleaner.
