9
Note:
①
Exhaust Valve: Pull the Exhaust Valve out from the lid. Clean the internal side of the
Exhaust Valve. Clean the Exhaust Valve and Float Valve with a brush and cloth at least
once a month.
②
Sealing Gate: Please remove any oil and dirt from the Sealing Gate with mild detergent and
a brush. Any remaining oil and dirt in it may appear yellowish in colour. After cleaning, it
may recover to the original stainless steel colour. It is suggested to clean the Sealing Gate
once every 2 (two) months.
③
Water Box: After cooking, steam/ water may remain in the Water Box of the External Pot.
Water in the box should cleaned and removed to maintain hygiene and cleanliness.
STRUCTURAL DIAGRAM OF THE FLOAT VALVE
Check to ensure that the Float Valve, Block Proof Cover and Seal Ring are correctly installed
before each use. Before placing the Inner Pot back into the Pressure Cooker, please remove
any dirt and water from the outer side of the Inner Pot and inside (internal sides) of the External
Pot.
